Heavy Mosquito Mesh Curtains | Tracking Attachment
If you don't order tracking rails and components in STEP 2, they won't be shipped If you don't order Attachment Fasteners in STEP 3, your curtains will not seal
Width Adjustments - Assuming you measured just the exposure without any overlap
Automatically add 2-inches per panel regardless of width, then
Add another 1-inch per panel for EACH edge that will snap to some surface
Subtract 1-in for EACH edge connecting a Stucco Strip, and ignore width of stucco strip
For Tracking Attachment: Add another 1-in per 10ft of panel width for relaxed fit.
Height Adjustments - These adjustments will give you a 1" overlap with floor
Tracking - Measure from underside of track mounting surface to floor (NO adjustments)
If height of a given panel varies by 2" or less, use taller height
Note: If you need multiple types of mesh for your project, complete Steps 1 thru 3 for one type of mesh, then return to Step 1 and repeat the process for the next type of mesh.
Heavy Mosquito Mesh
Shade | Privacy Mesh
3" Stucco Strips
Order with panels (top item)
Important Measurement Adjustments
We are aiming for a relaxed fit, not drum tight or sloppy loose. The adjustments below allow for overlap to seal sides, slight overlap of doorways, and take pressure off the curtains in breezy conditions. If you do not apply these adjustments, curtains will not fit properly. With that said let your good sense and intuition prevail.