Velcro® tape mounted curtains will have a 5/8" loop-sided Velcro strip that is double-stitched to the top binding of the curtain. You simply "peel and stick" a corresponding hook-sided Velcro® tape strip (included in your attachment kit) to your surface. It is best to attach the adhesive-backed hook-sided Velcro® tape strip to a vertical (perpendicular) wood surface like the outside face of a header beam. Adhesive-backed Velcro® tape WILL NOT stick to masonry. See special instructions for aluminum & vinyl siding

• Clean hanging surface with a damp towel.
• Peel and stick our adhesive-backed hook-sided Velcro® tape to a perpendicular face of your porch ceiling.
• Reinforce adhesive Velcro® tape with a staple gun every 12 inches.
• Hang curtain by pressing the top of the curtain to your hanging surface.
• Reinforce both top corners of your curtain panel using marine snaps.
• Secure the sides of your curtain, pour yourself a lemonade and enjoy your bug-free space

Will Velcro® tape hold? Yes. The attachment is difficult to pull away from the center.
The weak spots are the two upper corners of a given curtain panel that need to be reinforced
with marine snaps. With marine snaps, the curtain won't have the opportunity to blow open a
flap and slowly start a chain reaction where, in a few hours, your curtain would otherwise fall.

Doorways Even though the top of the curtains will not slide open, you can still create open doorways using 2 of our neodymium magnets to pin the curtain back without piercing the netting.

Stainless steel Marine Snaps can be ordered on the store page. We provide a tool so that you can position the marine snaps exactly where they are needed on any perimeter binding of the curtain. The male snaps are on a 5/8" screw stud and will screw into most any surface. We describe marine snaps in more detail including a installation video in Sealing Sides.